Displaying Multicast Queriers - Nortel 2360 Configuration Manual

Displaying multicast queriers

To display information about the multicast querier only without also displaying all the other multicast information, use
the following command:
show igmp querier [vlan vlan-id]
To display querier information for VLAN orange, type the following command:
WSS# show igmp querier vlan orange
Querier for vlan orange
Port Querier-IP
---- --------------- ----------------- -----
1 193.122.135.178 00:0b:cc:d2:e9:b4 23
In this example, the pseudo-querier feature is enabled on VLAN orange.
(For information about the fields in the output, see the
Reference.)
Querier-MAC TTL
Nortel WLAN Security Switch 2300 Series Command Line
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Configuring and managing IGMP snooping 403