Displaying And Changing Network Session Timers - Nortel 2360 Configuration Manual

Wlan-security switch 2300 series

Hide thumbs Also See for 2360:

Table of Contents

620 Managing sessions

Rx Multicast

Rx Encrypt Err

(For information about the fields in the output, see the

The verbose option is not available with the show sessions network session-id command.

To clear network sessions by session ID, type the following command with the appropriate local session ID number.

clear sessions network session-id session-id

For example, the following command deletes network session 9:

WSS# clear sessions network session-id 9

SM Apr 11 19:53:38 DEBUG SM-STATE: localid 9, mac 00:06:25:09:39:5d,

flags 0000012fh, to change state to KILLING

Localid 9, globalid SESSION-9-893249336 moved from ACTIVE to KILLING

(client=00:06:25:09:39:5d)

Displaying and changing network session timers

WSS Software periodically sends keepalive probes to wireless clients to verify that the clients are still present. The

keepalive probes are null data frames sent as unicasts to each client. WSS Software expects each client to respond with

an Ack. WSS Software sends the keepalives every 10 seconds. You can disable the keepalives but the keepalive interval

is not configurable.

WSS Software also maintains an idle timer for each user (wireless client). Each time the client sends data or responds to

a keepalive probe, WSS Software resets the idle timer to 0 for the client. However, if the client remains idle for the

NN47250-500 (320657-F Version 02.01)

Tx Dropped Re-Transmit

Nortel WLAN Security Switch 2300 Series Command Line

Show Quick Links

Table of Contents

2350 2361 Wlan 2382