Nortel 2360 Configuration Manual page 523

Table 5.Authentication attributes for local users
Attribute
encryption-type
end-date
filter-id
(network access
mode only)
idle-timeout
Description
Type of encryption
required for access
by the client. Clients
who attempt to use
an unauthorized
encryption method
are rejected.
Date and time after
which the user is no
longer allowed to be
on the network.
Security access
control list (ACL), to
permit or deny traffic
received (input) or
sent (output) by the
WSS.
(For more
information about
security ACLs, see
"Configuring and
managing security
ACLs" (page 407).)
This option is not implemented in the current WSS Software
version.
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Configuring AAA for network users 523
Valid Value(s)
One of the following numbers that
identifies an encryption algorithm:
• 1—AES_CCM (Advanced Encryption
Standard using Counter with CBC-MAC)
• 2—Reserved
• 4—TKIP (Temporal Key Integrity Protocol)
• 8—WEP_104 (the default) (Wired-Equivalent
Privacy protocol using 104 bits of key
strength)
• 16—WEP_40 (Wired-Equivalent Privacy
protocol using 40 bits of key strength)
• 32—NONE (no encryption)
• 64—Static WEP
In addition to these values, you can
specify a sum of them for a
combination of allowed encryption
types. For example, to specify
WEP_104 and WEP_40, use 24.
Date and time, in the following format:
YY/MM/DD-HH:MM
You can use end-date alone or with
start-date. You also can use
start-date, end-date, or both in
conjunction with time-of-day.
Name of an existing security ACL, up
to 253 alphanumeric characters, with
no tabs or spaces.
• Use acl-name.in to filter traffic that enters the
switch from users via an AP access port or
wired authentication port, or from the network
via a network port.
• Use acl-name.out to filter traffic sent from the
switch to users via an AP access port or wired
authentication port, or from the network via a
network port.
Note. If the Filter-Id value returned through the
authentication and authorization process does not
match the name of a committed security ACL in
the WSS, the user fails authorization and is unable
to authenticate.