Nortel 2360 Configuration Manual page 417

Configuring and managing security ACLs 417
For example, the following command permits UDP packets sent from IP address 192.168.1.7 to IP address 192.168.1.8,
with any UDP destination port less than 65,535. It puts this ACE first in the ACL, and counts the number of hits
generated by the ACE.
WSS# set security acl ip acl-5 permit udp 192.168.1.7 0.0.0.0 192.168.1.8 0.0.0.0 lt 65535
precedence 7 tos 15 before 1 hits
(For information about TOS and precedence levels, see the Nortel WLAN Security Switch 2300 Series Command Line
Reference. For CoS details, see "Class of Service" (page 412).)
Nortel WLAN—Security Switch 2300 Series Configuration Guide