Nortel 2360 Configuration Manual page 527

Table 5.Authentication attributes for local users (continued)
Attribute
url
(network access
mode only)
vlan-name
(network access
mode only)
acct-interim-interval Interval in seconds
Description
URL to which the
user is redirected
after successful
Web-based AAA.
Virtual LAN (VLAN)
assignment.
Note. On some RADIUS
servers, you might need to
use the standard RADIUS
attribute
Tunnel-Pvt-Group-ID,
instead of VLAN-Name.
between accounting
updates, if start-stop
accounting mode is
enabled.
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Configuring AAA for network users 527
Valid Value(s)
Web URL, in standard format. For
example:
http://www.example.com
Note. You must include the http:// portion.
You can dynamically include any of
the variables in the URL string:
• $u—Username
• $v—VLAN
• $s—SSID
• $p—Service profile name
To use the literal character $ or ?, use
the following:
• $$
• $q
Name of a VLAN that you want the
user to use. The VLAN must be
configured on a WSS within the
Mobility Domain to which this WSS
belongs.
Number between 180 and 3,600
seconds, or 0 to disable periodic
accounting updates.
The WSS ignores the
acct-interim-interval value and issues
a log message if the value is below 60
seconds.
Note. If both a RADIUS server and the WSS
supply a value for the acct-interim-interval
attribute, then the value from the WSS takes
precedence.