Nortel 2360 Configuration Manual page 351

Figure 3. QoS on APs —classification and marking of packets from clients to
WSSs
AP receives packet
from client.
Set packet CoS
based on 802.11
Service Type:
1 -> 1
2 -> 2
3 -> 3
4 -> 4
5 -> 5
6 -> 6
7 -> 7
Set tunnel's IP ToS
to 802.1p value.
Look up CoS and mark
packet's DSCP value:
1 -> 8
2 -> 16
3 -> 24
4 -> 32
5 -> 40
6 -> 48
7 -> 56
Set packet CoS
Static CoS
with static CoS
enabled?
Yes
value.
No
Set tunnel
IP ToS to static
CoS value.
Mark packet with
DSCP value
mapped to static
CoS value.
Transmit packet to WSS.
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Configuring quality of service 351