Nortel Vendor-Specific Attributes - Nortel 2360 Configuration Manual

Attribute Type
Acct-Multi- 50
Session-Id
Acct-Input- 52
Gigawords
Acct-Output- 53
Gigawords
Event- 55
Timestamp
Tunnel- 81
Private-Group-ID
NAS-Port-Id 87

Nortel vendor-specific attributes

The vendor-specific attributes (VSAs) created by Nortel are embedded according to the procedure recommended in
RFC 2865, with Vendor-ID set to 562.
(For attribute details, see
Table 1: 802.1X attributes (continued)
Rcv in Sent in
Access Access
Resp? Reqst?
No No
No No
No No
No No
Yes No
No Yes
Table 2 describes the Nortel VSAs, listed in order by vendor type number.
Table 5: "Authentication attributes for local users" on page
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Appendix A:Supported RADIUS attributes 701
Sent in
Acct Description and Values
Reqst?
Yes
Unique accounting ID that facilitates
linking together multiple related sessions
in a log file. Each linked session has a
unique Acct-Session-Id but the same
Acct-Multi-Session-
Id.
Yes
Number of times the Acct-Input-Octets
counter has wrapped around 2
course of this service being provided.
Can be present only in
Accounting-Request records in which
Acct-Status-Type is set to Acct-Stop or
Acct-Interim-Update. (For details, see
RFC 2869.)
Yes Number of times the Acct-Output-Octets
counter has wrapped around 2
course of this service being provided.
Can be present only in
Accounting-Request records in which
Acct-Status-Type is set to Acct-Stop or
Acct-Interim-Update. (For details, see
RFC 2869.)
Yes Time that the user session started,
stopped, or was updated, in seconds since
January 1, 1970.
No Same as VLAN-Name.
Yes WSS physical port that authenticates the
user, in the form AP port number/radio.
32
over the
32
over the
523.)