Setting The 802.1X Timeout For A Client; Displaying 802.1X Information - Nortel 2360 Configuration Manual

586 Managing 802.1X on the WSS

Setting the 802.1X timeout for a client

Use the following command to set the number of seconds before the WSS times out an authentication session with a
supplicant (client):
set dot1x timeout supplicant seconds
The default is 30 seconds. The range of time is from 1 to 65,535 seconds.
For example, type the following command to set the number of seconds for a timeout to 300:
WSS# set dot1x timeout supplicant 300
success: dot1x supplicant timeout set to 300.
Type the following command to reset the timeout period:
WSS# clear dot1x timeout supplicant
success: change accepted.

Displaying 802.1X information

This command displays 802.1X information for clients, statistics, VLANs, and configuration.
show dot1x {clients | stats | config}
• show dot1x clients displays the username, MAC address, VLAN, and state of active 802.1X clients.
• show dot1x config displays a summary of the current configuration.
• show dot1x stats displays global 802.1X statistical information associated with connecting and authenticating.
NN47250-500 (320657-F Version 02.01)