Using Pass-Through - Nortel 2360 Configuration Manual

Configuring AAA for network users 485

Using pass-through

The pass-through method causes EAP authentication requests to be processed entirely by remote RADIUS servers in
server groups.
For example, the following command enables users at EXAMPLE to be processed via server group shorebirds or
swampbirds:
WSS# set authentication dot1X ssid marshes EXAMPLE/* pass-through shorebirds
swampbirds
The server group swampbirds is contacted only if all the RADIUS servers in shorebirds do not respond.
(For an example of the use of pass-through servers plus the local database for authentication, see "Remote authentication
with local backup" (page 478).)
Nortel WLAN—Security Switch 2300 Series Configuration Guide