Nortel 2360 Configuration Manual page 172

172 Configuring and managing Mobility Domain roaming
• On the Mobility Domain seed switch, set the Mobility Domain mode and domain-name.
Seed Switch Example:
WSS-1# set mobility-domain mode seed domain-name NORTEL
• On the Mobility Domain seed switch, specify the IP addresses and public keys for each member switch. The unique
public key for each member switch is obtained from the show crypto domain key command.
Note.
The unique public key for each member switch will need to be set to the key obtained on
each member switch using the show crypto domain key command.
Seed Switch Example:
WSS-1# set mobility-domain member 192.168.110.16 key
c6:9b:d0:07:e7:61:9a:40:24:b0:02:4c:fd:d6:1b:9b
WSS-1# set mobility-domain member 192.168.110.17 key
93:b6:d2:70:f6:ff:b7:b0:fe:a3:df:4b:66:e0:53:6f:ab
• On each Mobility Domain member switch, specify the IP address and public key for the seed switch. The unique
public key for each member switch is obtained from the show crypto domain key command.
Note.
The public key for the seed switch will need to be set to the key obtained on the seed
switch using the show crypto domain key command.
Member Switch 1 Example:
WSS-1# set mobility-domain mode member seed-ip 192.168.110.15 key
ae:03:ca:0c:19:ac:af:f5:8e:10:cf:df:02:7a:00:d5
Member Switch 2 Example:
WSS-1# set mobility-domain mode member seed-ip 192.168.110.15 key
ae:03:ca:0c:19:ac:af:f5:8e:10:cf:df:02:7a:00:d5
• On the Mobility Domain seed switch set the Mobility Domain security mode to required.
Seed Switch Example:
WSS-1# set domain security required
• On each Mobility Domain member switch set the Mobility Domain security mode to required.
Member 1 Switch Example:
WSS-2# set domain security required
Member 2 Switch Example:
WSS-3# set domain security required
• Verify operations on the seed and member switches by issuing the show mobility-domain command.
Example:
WSS-1# show mobility-domain
Mobility Domain name: NORTEL (security required)
NN47250-500 (320657-F Version 02.01)