Installing The Soda Agent Files On The Wss - Nortel 2360 Configuration Manual

Installing the SODA agent files on the WSS

After copying the .zip file containing the SODA agent files to the WSS, you install the SODA agent files into a directory
using the following command:
install soda agent agent-file agent-directory directory
This command creates the specified directory, unzips the specified agent-file and places the contents of the file into the
directory. If the directory has the same name as an SSID, then that SSID uses the SODA agent files in the directory if
SODA functionality is enabled for the service profile that manages the SSID.
For example, the following command installs the contents of the file soda.ZIP into a directory called sp1.
WSS# install soda agent soda.ZIP agent-directory sp1
This command may take up to 20 seconds...
WSS#
If SODA functionality is enabled for the service profile that manages SSID sp1, then SODA agent files in this directory
are downloaded to clients attempting to connect to SSID sp1.
Configuring SODA endpoint security for a WSS 599
Nortel WLAN—Security Switch 2300 Series Configuration Guide