Displaying The Stp Port Cost On A Vlan Basis - Nortel 2360 Configuration Manual

384 Configuring and managing spanning tree protocol

Displaying the STP port cost on a VLAN basis

To display a brief list of the STP port cost for a port in each of its VLANs, use the following command:
show spantree portvlancost port-list
This command displays the same information as the show spantree command's Cost field in a concise format
for all VLANs. The show spantree command lists all the STP information separately for each VLAN.
To display the STP port cost of port 1, type the following command:
WSS# show spantree portvlancost 1
port 1 VLAN 1 have path cost 19
NN47250-500 (320657-F Version 02.01)