Nortel 2360 Configuration Manual page 215

the DNS server address, and the domain name. AP then sends a DHCP Request message to the
server and receives an Ack from the server.
3
The AP sends a broadcast Find WSS message to IP subnet broadcast address.
4
WSS1 and WSS3 have high priority for the AP and reply immediately.
5
The AP contacts WSS1 and determines whether it should use a locally stored operational image
or download it from the WSS.
WSS1 is contacted because it has fewer active AP connections than WSS3. Once the
operational image is loaded, the AP requests configuration information from WSS1.
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Configuring APs 215