Remote Authentication With Local Backup - Nortel 2360 Configuration Manual

Wlan-security switch 2300 series
Hide thumbs Also See for 2360:
Table of Contents

Advertisement

478 Configuring AAA for network users

Remote authentication with local backup

You can use a combination of authentication methods; for example, PEAP offload and local authentication. When PEAP
offload is configured, the WSS offloads all EAP processing from server groups; the RADIUS servers are not required to
communicate using the EAP protocols. (For details, see
that RADIUS servers are unavailable, local authentication takes place, using the database on the WSS.
Suppose an administrator wants to rely on RADIUS servers and also wants to ensure that a certain group of users always
gets access. As shown in the following example, the administrator can enable PEAP offload, so that authentication is
performed by a RADIUS server group as the first method for these users, and configure local authentication last, in case
the RADIUS servers are unavailable. (See
1
To configure server-1 and server-2 at IP addresses 192.168.253.1 and 192.168.253.2 with the password
chey3nn3, the administrator enters the following commands:
WSS# set radius server server-1 address 192.168.253.1 key chey3nn3
WSS# set radius server server-2 address 192.168.253.2 key chey3nn3
2
To configure server-1 and server-2 into server-group-1, the administrator enters the following command:
WSS# set server group server-group-1 members server-1 server-2
3
To enable PEAP offload plus local authentication for all users of SSID mycorp at @example.com, the
administrator enters the following command.
WSS# set authentication dot1x ssid mycorp *@example.com peap-mschapv2
server-group-1 local
Figure 2
shows the results of this combination of methods.
Figure 2.
Remote authentication with PEAP offload using local
authentication as backup
RADIUS
Server-1
set authentication dot1x ssid mycorp *@example.com peap-mschapv2 server-group-1
NN47250-500 (320657-F Version 02.01)
Figure
2.)
pass fail
5
RADIUS
Server-2
1
2
Server-group-1
1
"Configuring 802.1X Acceleration" (page
484).) In the event
WSS
local database
4
3
local

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

23502361Wlan 2382

Table of Contents