Enabling Soda Functionality For The Service Profile - Nortel 2360 Configuration Manual

600 Configuring SODA endpoint security for a WSS

Enabling SODA functionality for the service profile

To enable SODA functionality for a service profile, use the following command:
set service-profile name soda mode {enable | disable}
When SODA functionality is enabled for a service profile, a SODA agent is downloaded to clients attempting to connect
to an AP managed by the service profile. The SODA agent performs a series of security-related checks on the client. By
default, enforcement of SODA agent checks is enabled, so that a connecting client must pass the SODA agent checks in
order to gain access to the network.
For example, the following command enables SODA functionality for service profile sp1:
WSS# set service-profile sp1 soda mode enable
success: change accepted.
NN47250-500 (320657-F Version 02.01)