Setting The 802.1X Timeout For An Authorization Server - Nortel 2360 Configuration Manual

Setting the 802.1X timeout for an authorization server

Use this command to configure the number of seconds before the WSS times out a request to a RADIUS
authorization server.
set dot1x timeout auth-server seconds
The default is 30 seconds. The range is from 1 to 65,535 seconds.
For example, type the following command to set the authorization server timeout to 60 seconds:
WSS# set dot1x timeout auth-server 60
success: dot1x auth-server timeout set to 60.
To reset the authorization server timeout to the default, type the following command:
WSS# clear dot1x timeout auth-server
success: change accepted.
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Managing 802.1X on the WSS 585