Displaying Soda Configuration Information - Nortel 2360 Configuration Manual

608 Configuring SODA endpoint security for a WSS

Displaying SODA configuration information

To view information about the SODA configuration for a service profile, use the show service profile command.
The following is an example of the output of the show service profile command for service profile sp1. In the example,
the fields related to SODA functionality are highlighted in bold.
WSS# show service-profile sp1
ssid-name:
Beacon:
DHCP restrict:
Short retry limit:
Auth fallthru:
Enforce SODA checks:
Custom success web-page:
Custom logout web-page:
Static COS:
CAC mode:
User idle timeout:
Keep initial vlan:
Web Portal ACL:
WEP Key 1 value:
WEP Key 3 value:
WEP Unicast Index:
Shared Key Auth:
WPA enabled:
ciphers: cipher-tkip
authentication: 802.1X
TKIP countermeasures time: 60000ms
vlan-name =
session-timeout =
service-type =
11a beacon rate:
11a mandatory rate:
11b beacon rate:
11b mandatory rate:
11g beacon rate:
11g mandatory rate:
(For information about the fields in the output, see the
Reference.)
NN47250-500 (320657-F Version 02.01)
corp2 ssid-type:
yes Proxy ARP:
no No broadcast:
5 Long retry limit:
none Sygate On-Demand (SODA):
yes SODA remediation ACL:
Custom failure web-page:
Custom agent-directory:
no COS:
none CAC sessions:
180 Idle client probing:
no Web Portal Session Timeout:
<none> WEP Key 2 value:
<none> WEP Key 4 value:
1 WEP Multicast Index:
NO
orange
300
2
6.0 multicast rate:
6.0,12.0,24.0 standard rates:
2.0 multicast rate:
1.0,2.0 standard rates:
2.0 multicast rate:
1.0,2.0,5.5,11.0 standard rates:
14
yes
AUTO
9.0,18.0,36.0,48.0,54.0
AUTO
5.5,11.0
AUTO
6.0,9.0,12.0,18.0,24.0, 36.0,48.0,54.0
Nortel WLAN Security Switch 2300 Series Command Line
crypto
no
no
5
yes
0
5
<none>
<none>
1