Changing Or Disabling The User Idle Timeout - Nortel 2360 Configuration Manual

Changing or disabling the user idle timeout

To change the user idle timeout for a service profile, use the following command:
set service-profile name user-idle-timeout seconds
For example, to change the user idle timeout for service profile sp1 to 6 minutes (360 seconds), use the following
command:
WSS# set service-profile sp1 user-idle-timeout 360
success: change accepted.
To disable the user idle timeout, use the following command:
WSS# set service-profile sp1 user-idle-timeout 0
success: change accepted.
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Managing sessions 623