Displaying Software Version Information - Nortel 2360 Configuration Manual

652 Managing system files

Displaying software version information

To display the software, firmware, and hardware versions, use the following command:
show version [details]
The details option displays hardware and software information about the APs configured on the WSS.
To display version information for a WSS, type the following command:
WSS# show version
Wireless Security Software, Version: 5.0.7.0 QA 20
Copyright (c) 2005 - 2006 Nortel. All rights reserved.
Build Information: (build#20) REL_5_0_branch 2006-11-17 00:10:00
Model:
Hardware
Mainboard:
Serial number
Flash:
Kernel:
BootLoader:
To also display AP information, type the following command:
WSS# show version details
Wireless Security Software, Version: 5.0.7.0 QA 20
Copyright (c) 2005 - 2006 Nortel. All rights reserved.
Build Information: (build#20) REL_5_0_branch 2006-11-17 00:10:00
Label:
Build Suffix:
Model:
Hardware
Mainboard:
CPU Model:
Serial number
Flash:
Kernel:
BootLoader:
Port/AP AP Model Serial #
-------- ---------- -------------- ------------------------
1 /- 2330
NN47250-500 (320657-F Version 02.01)
2360
version 1 ; revision 01 ; FPGA version 8
STP1W400H6
1.0.0 - 0
QNX-630
4.3 / 5.0.4
5.0.7.0.20_111706
-d-O1-nortel
2360
version 1 ; revision 01 ; FPGA version 8
405EP (Revision 9.80)
STP1W400H6
1.0.0 - 0
QNX-630
4.3 / 5.0.4
Versions
STP1W20EV9 H/W : 02
F/W1 : 5.7
F/W2 : 5.7
S/W : 5.0.7.0.20_111706_0010_
BOOT S/W : 5.0.7.0.20_111706_0010_