Table of Contents
Advertisement
33-4 Firmware and Configuration File Maintenance
33.2.3 Example of FTP Commands from the Command Line
Figure 33-2 FTP Session Example
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 config.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit
33.2.4 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-
based FTP clients.
Table 33-2 General Commands for GUI-based FTP Clients
COMMAND
Host Address
Login Type
Transfer Type
Initial Remote Directory
Initial Local Directory
33.2.5 TFTP and FTP over WAN Will Not Work When
TFTP, FTP and Telnet over WAN will not work when:
1. You have disable Telnet service in menu 24.11.
317516-A Rev 00
Enter the address of the host server.
Anonymous.
This is when a user I.D. and password is automatically supplied to the
server for anonymous access. Anonymous logins will work only if your
ISP or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer files in either ASCII (plain text format) or in binary mode.
Specify the default remote directory (path).
Specify the default local directory (path).
DESCRIPTION
Advertisement
Table of Contents
