Nortel 2360 Configuration Manual page 354

354 Configuring quality of service
An AP uses the DSCP-to-CoS and CoS-to-DSCP mappings of the WSS that is managing it. If you change mappings on
a WSS, the change also applies to the AP. Likewise, if an AP changes to another WSS (for example, after an AP restart),
the AP uses the mappings in effect on the new WSS.
Table 5 lists the default mappings between an AP's internal CoS values and its forwarding queues.
Table 5.Default
CoS-to-AP-forwarding-queue mappings
CoS
1 or 2
0 or 3
4 or 5
6 or 7
(To display an AP's CoS mappings and queue usage statistics, see
(page 364).)
Figure 5 shows an example of end-to-end QoS in a Nortel network. In this example, voice traffic is prioritized based on
WMM. This example assumes that the QoS mappings are set to their default values.
NN47250-500 (320657-F Version 02.01)
AP Forwarding
Queue
Background
Best Effort
Video
Voice
"Displaying AP forwarding queue statistics"