Configuring 802.1X key transmission time intervals
The following command sets the number of seconds the WSS waits before retransmitting an EAPoL packet of key
information:
set dot1x tx-period seconds
The default is 5 seconds. The range for the retransmission interval is from 1 to 65,535 seconds. For example, type the
following command to set the retransmission interval to 300 seconds:
WSS# set dot1x tx-period 300
success: dot1x tx-period set to 300.
Type the following command to reset the retransmission interval to the 5-second default:
WSS# clear dot1x tx-period
success: change accepted.
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Managing 802.1X on the WSS 577