Nortel 2360 Configuration Manual page 700

700 Appendix A:Supported RADIUS attributes
Attribute Type
Acct-Status- 40
Type
Acct-Delay- 41
Time
Acct-Input- 42
Octets
Acct-Output- 43
Octets
Acct-Session- 44
Id
Acct-Authentic 45
Acct-Session- 46
Time
Acct-Input- 47
Packets
Acct-Output- 48
Packets
NN47250-500 (320657-F Version 02.01)
Table 1: 802.1X attributes (continued)
Rcv in Sent in
Access Access
Resp? Reqst?
No No
No No
No No
No No
No No
No No
No No
No No
No No
Sent in
Acct Description and Values
Reqst?
Yes Valid values:
• Acct-Start
• Acct-Interim-Update
• Acct-Stop
Yes Time in seconds for which the client has
been trying to send the record.
Yes Number of octets received from the port
over the course of this service being
provided. Can be present only in
Accounting-Request records in which
Acct-Status-Type is set to Acct-Stop or
Acct-Interim-Update.
Yes Number of octets sent on the port in the
course of this service being provided.
Can be present only in
Accounting-Request records in which
Acct-Status-Type is set to Acct-Stop or
Acct-Interim-Update.
Yes Unique accounting ID to facilitate
matching start and stop records in a log
file. The start and stop records for a given
session must have the same
Acct-Session-Id.
Yes Valid values:
• RADIUS
• Local
Yes Number of seconds for which the user
has received service. Can be present only
in Accounting-Request records in which
Acct-Status-Type is set to Acct-Stop or
Acct-Interim-Update.
Yes Number of packets received in the course
of this service being provided. Can be
present only in Accounting-Request
records in which Acct-Status-Type is set
to Acct-Stop or Acct-Interim-Update.
Yes Number of packets sent in the course of
this service being provided. Can be
present only in Accounting-Request
records in which Acct-Status-Type is set
to Acct-Stop or Acct-Interim-Update.