About Expert Mode
Changing to Expert Mode
WireScope's Expert mode includes many configuration and testing
options not included in the standard test configurations.
To change the WireScope from standard configuration to Expert mode:
1 On the Main menu, press System. The System Settings screen
displays.
2 On the System Settings screen, press User Interface, then press
Edit. The User Interface Setup screen displays.
3 On the User Interface Setup screen, press Expert Mode to turn it on
(a check mark will appear in the box,) then press OK. The System
Settings screen displays.
@r
ÃHqrÃs
Ã8r
ÃUrvt
6iÃ@r
ÃHqr
6−3