Table of Contents
Advertisement
Installation
13 On the 'Controls' screen:
14 When 'Advanced Settings' are displayed:
The camera image will appear black because the SpectrAA is turned
off.
Printer Setup
The printer must be a make and model supported by Windows. To
install your printer, follow the instructions provided with the printer.
For more information refer to your printer documentation or
Microsoft Windows Help.
Troubleshooting
This section contains solutions to some common problems you may
encounter during the installation of the SpectrAA software.
The SpectrAA software isn't communicating with the instrument.
60
a
Deselect 'RightSound'
b
Deselect 'RightLight'.
c
Deselect 'Autofocus'.
d
Select 'Advanced Settings'.
a
Deselect 'Auto' to the right of the 'Gain' slider.
b
Set the 'Exposure' and 'Gain' sliders to maximum.
c
Click Save.
Ensure the computer has been restarted after installing the
software and the GPIB card or USB-GPIB-HS converter.
Check the cables and connections.
Check that the instrument and any associated accessories are
turned on.
Check that you are not running the Simulator software. (Select
Help about system information.)
Ensure the PCI-GPIB driver has been installed and configured.
Refer to Pages 51 and 54 for details.
Agilent 240/280 Series AA User's Guide
Advertisement
Table of Contents
