Table of Contents
Advertisement
SONET_Usr.bk Page 155 Wednesday, December 13, 2000 11:11 AM
Description
WA RN IN G
HOW TO:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Storing, Logging and Printing
Changing Internal Printer Paper
Changing Internal Printer Paper
The printer accepts rolls of thermal paper with the following dimensions:
Width:
Maximum Outside Diameter: 40 mm
Inside Core Diameter:
Suitable rolls of paper are available from Agilent, Part Number 9270-1360.
The paper tear-off edge is SHARP. This edge is exposed when the printer cover
is raised. Note the
CAUTION SHARP EDGE label on the cover.
!
1 Raise the two locking tabs on the sides of the printer cover and then raise the
cover.
2 Raise the printer mechanism front cover. This releases the paper drive. Remove
any remaining paper from the front (in the normal direction of operation).
LIFT TO CLEAR PAPER PATH
3 Lift out the spindle. Adjust the paper width adaptor to the width of the paper being
used.
4 Put the paper roll on the spindle such that the sensitive side (slightly shiny) will
be on the underside of the print mechanism. Ensure that the relocation of the
spindle locks the blue width adaptor in position.
216 mm (8.5 in) or 210 mm (8.27 in) (A4)
tolerance +2.0 mm - 1.0 mm
Between 12.5 mm and 13.2 mm
155
Advertisement
Table of Contents
