SONET_Usr.bk Page 108 Wednesday, December 13, 2000 11:11 AM
Making Measurements
Measuring Optical Power
Measuring Optical Power
Description
Optical power measurement can be performed on theSDH/ SONET signal
connected to the Optical module IN port.
1 Connect the SDH/SONET optical signal to the IN port of the Optical Interface
HOW TO:
2 Choose the received input signal rate on the
3 Select
NOT E
1. Optical power measurement is always available even if test timing is off.
2. The green portion of the colored bar shows the power range for accurate BER
measurement.
108
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
module.
display.
,
SONET
RESULTS
SONET
RECEIVE
or
,
SDH
OPTICAL POWER
or
SDH
as shown above.