Show Logging - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Time Since Counters Last Cleared

show logging

This command displays the trap log maintained by the switch. The trap log contains a maximum of
256 entries that wrap.
Format
Mode
Number of Traps since last reset
Number of Traps since log last displayed
Log
Switching Commands
Broadcast Packets Transmitted - The total number of packets that
higher-level protocols requested be transmitted to the Broadcast
address, including those that were discarded or not sent.
Transmit Packets Discarded - The number of outbound packets which
were chosen to be discarded even though no errors had been detected to
prevent their being deliverable to a higher-layer protocol. A possible
reason for discarding a packet could be to free up buffer space.
Most Address Entries Ever Used - The highest number of Forwarding
Database Address Table entries that have been learned by this switch
since the most recent reboot.
Address Entries in Use - The number of Learned and static entries in
the Forwarding Database Address Table for this switch.
Maximum VLAN Entries - The maximum number of Virtual LANs
(VLANs) allowed on this switch.
Most VLAN Entries Ever Used - The largest number of VLANs that
have been active on this switch since the last reboot.
Static VLAN Entries - The number of presently active VLAN entries
on this switch that have been created statically.
Dynamic VLAN Entries - The number of presently active VLAN
entries on this switch that have been created by GVRP registration.
VLAN Deletes - The number of VLANs on this switch that have been
created and then deleted since the last reboot.
The elapsed time, in days, hours, minutes, and seconds,
since the statistics for this switch were last cleared.
show logging
Privileged EXEC
The number of traps that have occurred since the last reset
of this device.
The number of traps that have occurred since the
traps were last displayed. Getting the traps by any method (terminal
interface display, Web display, upload file from switch etc.) will result
in this counter being cleared to 0.
The sequence number of this trap.
202-10102-01, May 2005
8-11