User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Bad Authenticators
Pending Requests
Timeouts
Unknown Types
Packets Dropped
Secure Shell (SSH) Commands
This section provides a detailed explanation of the SSH commands. The commands are divided
into the following groups:
•
Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
•
Show commands are used to display switch settings, statistics and other information
Note: A maximum of 5 SSH sessions is allowed.
ip ssh
This command is used to enable SSH.
Default
Format
Mode
no ip ssh
This command is used to disable SSH.
Format
Mode
9-22
length. Bad authenticators or signature attributes or unknown types are not
included as malformed access responses.
The number of RADIUS Access-Response packets containing invalid authenti-
cators or signature attributes received from this server.
The number of RADIUS Access-Request packets destined for this server that
have not yet timed out or received a response.
The number of authentication timeouts to this server.
The number of RADIUS packets of unknown types, which were received from
this server on the authentication port.
The number of RADIUS packets received from this server on the authentication
port and dropped for some other reason.
disabled
ip ssh
Privileged EXEC
no ip ssh
Privileged EXEC
202-10102-01, May 2005
Security Commands