Show Mac-Address-Table Static; Show Mac-Address-Table Staticfiltering - NETGEAR ProSafe GSM7248 User Manual

Layer 2 managed switch software version 4
Hide thumbs Also See for ProSafe GSM7248:
Table of Contents

Advertisement

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Mac Address
Type
Component
Description
Interfaces
Forwarding Interfaces

show mac-address-table static

This command displays the Static MAC Filtering information for all Static MAC Filters. If <all> is
selected, all the Static MAC Filters in the system are displayed. If a macaddr is entered, a vlan
must also be entered and the Static MAC Filter information will be displayed only for that MAC
address and VLAN.
Format
Mode
MAC Address
VLAN ID
Source Port(s)
Destination Port(s)

show mac-address-table staticfiltering

This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB)
table.
Format
Mode
8-46
A multicast MAC address for which the switch has forwarding and or filtering
information. The format is two-digit hexadecimal numbers that are separated by
colons, for example 01:23:45:67:89:AB. In an IVL system the MAC address
will be displayed as a MAC address and VLAN ID combination of 8 bytes.
This displays the type of the entry. Static entries are those that are configured by
the end user. Dynamic entries are added to the table as a result of a learning pro-
cess or protocol.
The component that is responsible for this entry in the Multicast Forwarding
Database. Possible values are IGMP Snooping, GMRP, and Static Filtering.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding (Fwd:) and filtering
(Flt:).
The resultant forwarding list is derived from combining all the component's for-
warding interfaces and removing the interfaces that are listed as the static filter-
ing interfaces.
show mac-address-table static {<macaddr> <vlanid> |
all}
Privileged EXEC
Is the MAC Address of the static MAC filter entry.
Is the VLAN ID of the static MAC filter entry.
Indicates the source port filter set's slot and port(s).
Indicates the destination port filter set's slot and port(s).
show mac-address-table staticfiltering
Privileged EXEC
202-10102-01, May 2005
Switching Commands

Advertisement

Table of Contents
loading

This manual is also suitable for:

7200 series

Table of Contents