Security Commands; Port Security Commands; No Port-Security - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
This section provides a detailed explanation of the Security commands. The commands are
divided into the following groups:
• Configuration commands are used to configure features and options of the switch. For
every configuration command there is a show command that will display the configuration
setting.
• Show commands are used to display switch settings, statistics and other information.

Port Security Commands

This section provides a detailed explanation of the Port Security commands. The commands are
divided into the following groups:
• Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
• Show commands are used to display switch settings, statistics and other information.
port-security
This command enables port locking at the system level (Global Config) or port level (Interface
Config)
Default
Format
Modes

no port-security

This command disables port locking at the system level (Global Config) or port level (Interface
Config).

Security Commands

Disabled
port-security
Global Config
Interface Config
202-10102-01, May 2005
Chapter 9
Security Commands
9-1