NETGEAR ProSafe GSM7248 User Manual page 259

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Figure 10-4 shows the RJ-45 plug and RJ-45 connector.
Figure 10-4: RJ-45 Plug and RJ-45 Connector with Built-in LEDs
Table 10-1 lists the pin assignments for the 10/100 Mbps RJ-45 plug and the RJ-45 connector.
Table 10-1. 10/100 Mbps RJ-45 Plug and RJ-45 Connector Pin Assignments
PIN NORMAL ASSIGNMENT ON
PORTS 1 TO 8
1 Input Receive Data +
2 Input Receive Data –
3 Output Transmit Data +
6 Output Transmit Data –
4, 5, 7, 8 Internal termination, not used for data transmission
Table E-2 lists the pin assignments for the 100/1000 Mbps RJ-45 plug and the RJ-45 connector.
Cabling Guidelines
202-10102-01, May 2005
UPLINK ASSIGNMENT ON
PORT 8
Output Transmit Data +
Output Transmit Data –
Input Receive Data +
Input Receive Data –
A-7