Quick Start Up Downloading From Tftp Server; Quick Start Up Factory Defaults - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4

Quick Start up Downloading from TFTP Server

Before starting a TFTP server download, the operator must complete the Quick Start up for the IP
Address.
Table 6-7. Quick Start up Downloading from TFTP Server
Command
copy <url> {nvram:startup-config |
system:image}

Quick Start up Factory Defaults

Table 6-8. Quick Start up Factory Defaults
Command
clear config
copy system:running-config
nvram:startup-config
reload OR Cold Boot the Switch
6-6
Details
Sets the download datatype to be an image
or config file.
The URL must be specified as:
tftp://ipAddr/filepath/fileName.
The nvram:startup-config option downloads
the config file using tftp and system:image
option downloads the code file.
Details
Enter yes when the prompt pops up to clear all the configurations
made to the switch.
Enter yes when the prompt pops up that asks if you want to save
the configurations made to the switch.
Enter yes when the prompt pops up that asks if you want to reset
the system.
This is the users choice either reset the switch or cold boot the
switch, both work effectively.
202-10102-01, May 2005
Quick Start up