Spanning-Tree Forward-Time; No Spanning-Tree Forward-Time; Spanning-Tree Hello-Time; No Spanning-Tree Hello-Time - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Mode

spanning-tree forward-time

This command sets the Bridge Forward Delay parameter to a new value for the common and
internal spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the
value being greater than or equal to "(Bridge Max Age / 2) + 1".
Default
Format
Mode

no spanning-tree forward-time

This command sets the Bridge Forward Delay parameter for the common and internal spanning
tree to the default value, i.e. 15.
Format
Mode

spanning-tree hello-time

This command sets the Admin Hello Time parameter to a new value for the common and internal
spanning tree. The hellotime <value> is in whole seconds within a range of 1 to 10 with the value
being less than or equal to "(Bridge Max Age / 2) - 1".
Default
Format
Mode

no spanning-tree hello-time

This command sets the admin Hello Time parameter for the common and internal spanning tree to
the default value.
Format
Mode
8-122
Global Config
15
spanning-tree forward-time <4-30>
Global Config
no spanning-tree forward-time
Global Config
2
spanning-tree hello-time <1-10>
Interface Config
no spanning-tree hello-time
Interface Config
202-10102-01, May 2005
Switching Commands