No Sntp Broadcast Client Poll-Interval; Sntp Client Mode; Sntp Client Port; No Sntp Client Port - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4

no sntp broadcast client poll-interval

This command will reset the poll interval for SNTP broadcast client back to its default value.
Format
Mode

sntp client mode

This command will enable Simple Network Time Protocol (SNTP) client mode and optionally
setting the mode to either broadcast, multicast, or unicast.
Default
Format
Mode
sntp client mode
This command will disable Simple Network Time Protocol (SNTP) client mode.
Format
Mode

sntp client port

This command will set the SNTP client port id to a value from 1-65535.
Default
Format
Mode

no sntp client port

This command will reset the SNTP client port back to its default value.
Format
Mode
Switching Commands
no sntp broadcast client poll-interval
Global Config
Disabled
sntp client mode [broadcast | multicast | unicast]
Global Config
no sntp client mode
Global Config
123
sntp client port <portid>
Global Config
no sntp client port
Global Config
202-10102-01, May 2005
8-73