No Authentication Login; Clear Dot1X Statistics; Clear Radius Statistics; Dot1X Defaultlogin - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Format
Mode

no authentication login

This command deletes the specified authentication login list. The attempt to delete will fail if any
of the following conditions are true:
• The login list name is invalid or does not match an existing authentication login list
• The specified authentication login list is assigned to any user or to the non configured user for
any component
• The login list is the default login list included with the default configuration and was not
created using '
authentication login
Format
Mode

clear dot1x statistics

This command resets the 802.1x statistics for the specified port or for all ports.
Format
Mode

clear radius statistics

This command is used to clear all RADIUS statistics.
Format
Mode

dot1x defaultlogin

This command assigns the authentication login list to use for non-configured users for 802.1x port
security. This setting is over-ridden by the authentication login list assigned to a specific user if the
user is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
9-6
authentication login <listname> [method1 [method2
[method3]]]
Global Config
'. The default login list cannot be deleted.
no authentication login <listname>
Global Config
clear dot1x statistics { <slot/port> | all }
Privileged EXEC
clear radius statistics
Privileged EXEC
202-10102-01, May 2005
Security Commands