Show Sntp; Show Sntp Client; Show Sntp Server - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4

show sntp

This command is used to display SNTP settings and status.
Format
Mode
Last Update Time
Last Attempt Time
Last Attempt Status
Broadcast Count
Multicast Count

show sntp client

This command is used to display SNTP client settings.
Format
Mode
Client Supported Modes
SNTP Version
Port
Client Mode:
Poll Interval
Poll Timeout
Poll Retry

show sntp server

This command is used to display SNTP server settings and configured servers.
Format
Mode
8-76
show sntp
Privileged Exec
Time of last clock update.
Time of last transmit query (in unicast mode).
Status of the last SNTP request (in unicast mode) or unsolicited message
(in broadcast mode).
Current number of unsolicited broadcast messages that have been
received and processed by the SNTP client since last reboot.
Current number of unsolicited multicast messages that have been
received and processed by the SNTP client since last reboot
show sntp client
Privileged Exec
Supported SNTP Modes (Broadcast, Unicast, or Multicast).
The highest SNTP version the client supports
SNTP Client Port
Configured SNTP Client Mode
Poll interval value for SNTP clients in seconds as a power of two.
Poll timeout value in seconds for SNTP clients.
Poll retry value for SNTP clients.
show sntp server
Privileged Exec
202-10102-01, May 2005
Switching Commands