User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
protocol vlan group
This command adds the physical <
may have more than one interface associated with it. Each interface and protocol combination can only be associated
with one group. If adding an interface to a group causes any conflicts with protocols currently associated with the group,
this command will fail and the interface(s) will not be added to the group.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
Default
Format
Mode
no protocol vlan group
This command removes the <
all
If <
is selected, all ports will be removed from this protocol group.
>
Format
Mode
protocol vlan group all
This command adds all physical interfaces to the protocol-based VLAN identified by <
more than one interface associated with it. Each interface and protocol combination can only be associated with one
group. If adding an interface to a group causes any conflicts with protocols currently associated with the group, this
command will fail and the interface(s) will not be added to the group.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
Default
Format
Mode
no protocol vlan group all
This command removes all interfaces from this protocol-based VLAN group that is identified by
this <groupid>.
8-56
slot/port
interface to the protocol-based VLAN identified by <
>
none
protocol vlan group <groupid>
Interface Config
interface
from this protocol-based VLAN group that is identified by this <
>
no protocol vlan group <groupid>
Interface Config
none
protocol vlan group all <groupid>
Global Config
202-10102-01, May 2005
groupid
. A group
>
groupid
groupid
. A group may have
>
Switching Commands
.
>