No Cos-Queue Min-Bandwidth; Cos-Queue Strict; No Cos-Queue Strict; Traffic-Shape - NETGEAR ProSafe GSM7248 User Manual
Layer 2 managed switch software version 4
Hide thumbs
Also See for ProSafe GSM7248:
- Operating instructions manual (22 pages) ,
- Brochure (2 pages) ,
- Cli reference manual (284 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
no cos-queue min-bandwidth
This command restores the default for each queue's minimum bandwidth value.
Format
Modes
cos-queue strict
This command activates the strict priority scheduler mode for each specified queue.
Format
Modes
no cos-queue strict
This command restores the default weighted scheduler mode for each specified queue.
Format
Modes
traffic-shape
This command specifies the maximum transmission bandwidth limit for the interface as a whole.
Also known as rate shaping, this has the effect of smoothing temporary traffic bursts over time so
that the transmitted traffic rate is bounded.
Format
Modes
no traffic-shape
This command restores the interface shaping rate to the default value.
Format
Quality of Service (QoS) Commands
no cos-queue min-bandwidth
Global Config
Interface Config
cos-queue strict <queue-id-1> [<queue-id-2> ... <queue-
id-n>]
Global Config
Interface Config
no cos-queue strict <queue-id-1> [<queue-id-2> ...
<queue-id-n>]
Global Config
Interface Config
traffic-shape <bw>
Global Config
Interface Config
no traffic-shape
202-10102-01, May 2005
10-31
Advertisement
Table of Contents
