Show Monitor - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Mac Address
Type
Description
Interfaces
show mac-address-table stats
This command displays the Multicast Forwarding Database (MFDB) statistics.
Format
Mode
Total Entries
Most MFDB Entries Ever Used
Current Entries

show monitor

This command displays the Port monitoring information for the system.
Format
Mode
Port Monitor Mode
Probe Port slot/port
Monitored Port slot/port
has not been configured, 'Not Configured' will be displayed.
Switching Commands
A unicast MAC address for which the switch has forwarding and or filtering
information. The format is 6 or 8 two-digit hexadecimal numbers that are sepa-
rated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC
address will be displayed as 8 bytes.
This displays the type of the entry. Static entries are those that are configured by
the end user. Dynamic entries are added to the table as a result of a learning pro-
cess or protocol.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding (Fwd:) and filtering
(Flt:).
show mac-address-table stats
Privileged EXEC
This displays the total number of entries that can possibly be in the Multicast
Forwarding Database table.
This displays the largest number of entries that have been present in
the Multicast Forwarding Database table. This value is also known as the
MFDB high-water mark.
This displays the current number of entries in the Multicast Forwarding Data-
base table.
show monitor
Privileged EXEC
indicates whether the Port Monitoring feature is enabled or disabled.
The possible values are enable and disable.
is the slot/port configured as the probe port. If this value has not been
configured, 'Not Configured' will be displayed.
is the slot/port configured as the monitored port. If this value
202-10102-01, May 2005
8-47