NETGEAR ProSafe GSM7248 User Manual page 206

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
If the optional parameter 'summary {<slot/port> | all}' is used, the dot1x configuration for the
specified port or all ports are displayed.
Port
Control Mode
Operating Control Mode
Reauthentication Enabled
Key Transmission Enabled
If the optional parameter 'detail <slot/port>' is used, the detailed dot1x configuration for the
specified port are displayed.
Port
Protocol Version
PAE Capabilities
Authenticator PAE State
Backend Authentication State
Quiet Period
Transmit Period
Supplicant Timeout
Server Timeout
Maximum Requests
9-14
The interface whose configuration is displayed.
The configured control mode for this port. Possible values are force-unautho-
rized | force-authorized | auto
The control mode under which this port is operating. Possible values are
authorized | unauthorized
Indicates whether re-authentication is enabled on this port
Indicates if the key is transmitted to the supplicant for the specified port
The interface whose configuration is displayed
The protocol version associated with this port. The only possible value is 1, cor-
responding to the first version of the dot1x specification.
The port access entity (PAE) functionality of this port. Possible values are
Authenticator or Supplicant.
Current state of the authenticator PAE state machine. Possible values are Ini-
tialize, Disconnected, Connecting, Authenticating, Authenticated, Aborting,
Held, ForceAuthorized, and ForceUnauthorized.
Current state of the backend authentication state machine. Possible
values are Request, Response, Success, Fail, Timeout, Idle, and Initialize.
The timer used by the authenticator state machine on this port to define periods
of time in which it will not attempt to acquire a supplicant. The value is
expressed in seconds and will be in the range 0 and 65535.
The timer used by the authenticator state machine on the specified port to deter-
mine when to send an EAPOL EAP Request/Identity frame to the supplicant.
The value is expressed in seconds and will be in the range of 1 and 65535.
The timer used by the authenticator state machine on this port to timeout the
supplicant. . The value is expressed in seconds and will be in the range of 1 and
65535.
The timer used by the authenticator on this port to timeout the authentication
server. The value is expressed in seconds and will be in the range of 1 and
65535.
The maximum number of times the authenticator state machine on this port will
retransmit an EAPOL EAP Request/Identity before timing out the supplicant.
The value will be in the range of 1 and 10.
202-10102-01, May 2005
Security Commands