User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
•
Traffic Management
Secondary Menus
The Secondary Menus under the Main Menu contain a host of options that you can use to
configure your switch. The online help contains a detailed description of the features on each
screen. You can click the 'help' or the question mark at the top right of each screen to view the
help menu topics.
The Secondary Menus are detailed below, with cross-references to the sections in this manual that
contain the corresponding command descriptions.
Management
•
System — see
•
Utilities — see
•
Access — see the following sections:
•
"Administration Console Interface" on page 3-1
•
"System Management Commands" on page 8-14
•
Security — see
page 8-77
•
Port Access Control —
Commands" on page 9-5
•
RADIUS — see
Commands" on page 9-17
Switch
•
Port — see
"show port" on page 8-48
•
MAC Addresses — see
•
Spanning Tree — see
•
Link Aggregation — see
on page 8-113
•
VLAN — see
•
Mcast Fwding DB — see
4-6
"System Information and Statistics Commands" on page 8-1
"System Utility Commands" on page 8-60
Chapter 9, "Security Commands
"Port Based Network Access Control (IEEE 802.1X)
"Remote Authentication Dial In User Service (RADIUS)
"System Information and Statistics Commands" on page 8-1
"Spanning Tree (STP) Commands" on page 8-118
"Link Aggregation (LAG)/Port-Channel (802.3AD) Commands"
"show vlan" on page 8-58
"show forwardingdb agetime" on page 8-22
202-10102-01, May 2005
and
"User Account Commands" on
Web-Based Management Interface