Show Igmpsnooping - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Format
Modes

show igmpsnooping

This command displays IGMP Snooping information. Configured information is displayed
whether or not IGMP Snooping is enabled.
Format
Mode
This display parameters when the optional arguments '<slot/port
as follows:
Admin Mode
Interfaces Enabled for IGMP Snooping
Multicast Control Frame Count
Data Frames Forwarded by the CPU
VLANS Enabled for IGMP Snooping This is the list of VLANS on which IGMP
Snooping is enabled.
Additional display parameters when the argument is 'slot/port' are as follows:
Interface Admin Mode
Query Interval Time
Max Response Time
Multicast Router Present Expiration Time
Additional display parameters when the argument is '<vlanId>' are as follows:
VLAN Admin Mode
Switching Commands
no set igmp fast-leave <vlanId>
Interface Config
Vlan Mode
show igmpsnooping [<
Privileged EXEC
This indicates whether or not IGMP Snooping is active on the switch.
This is the list of interfaces on which IGMP Snooping is
enabled.
This displays the number of multicast control frames that are pro-
cessed by the CPU.
This displays the number of data frames that are forwarded by
the CPU.
This indicates whether or not IGMP Snooping is active on the interface.
This displays the IGMP Query Interval Time. This is the amount of time a
switch will wait for a report for a particular group on a particular interface
before it sends a query on that interface. This value may be configured
This displays the amount of time the switch will wait after sending a query on an
interface, participating in the VLAN, because it did not receive a report for a
particular group on that interface. This value may be configured.
If a query is not received on an interface, participating
in the VLAN, within this amount of time, the interface is removed from the list
of interfaces with multicast routers attached. This value may be configured.
This indicates whether or not IGMP Snooping is active on the VLAN.
202-10102-01, May 2005
slot/port
<
> | vlanId>
' or '<vlanId>' are not used are
>
]
8-111