Set Garp Timer Leaveall; No Set Garp Timer Leaveall; Set Garp Timer Leaveall All - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Note:
This command has an effect only when GVRP is enabled.
Format
Mode

set garp timer leaveall

This command sets how frequently
indicates that all registrations will be unregistered. Participants would need to rejoin in order to
maintain registration. The value applies per port and per GARP participation. The time may range
from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds.
Note:
This command has an effect only when GVRP is enabled.
Default
Format
Mode

no set garp timer leaveall

This command sets how frequently
seconds). .
Note:
This command has an effect only when GVRP is enabled
Format
Mode

set garp timer leaveall all

This command sets how frequently
indicates that all registrations will be unregistered. Participants would need to rejoin in order to
maintain registration. The value applies per port and per GARP participation. The time may range
from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds.
Note:
This command has an effect only when GVRP is enabled
Default
Format
Mode
8-102
no set garp timer leave all
Global Config
are generated per port. A
Leave All PDUs
1000
set garp timer leaveall <200-6000>
Interface Config
are generated per port to 1000 centiseconds (10
Leave All PDUs
no set garp timer leaveall
Interface Config
are generated for all ports. A
Leave All PDUs
1000
set garp timer leaveall all <200-6000>
Global Config
202-10102-01, May 2005
Leave All PDU
.
.
Switching Commands
Leave All PDU