Domain-Name; No Domain-Name; Ip Dhcp Bootp Automatic; No Ip Dhcp Bootp Automatic - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4

domain-name

This command specifies the domain name for a DHCP client. The <domain> specifies the domain
name string of the client.
Default
Format
Mode

no domain-name

This command removes the domain name.
Format
Mode

ip dhcp bootp automatic

This command enables the allocation of the addresses to the bootp client. The addresses are from
the automatic address pool.
Default
Format
Mode

no ip dhcp bootp automatic

This command disables the allocation of the addresses to the bootp client. The address are from the
automatic address pool.
Format
Mode

ip dhcp conflict logging

This command enables conflict logging on DHCP server.
Default
Format
8-88
none
domain-name <domain>
DHCP Pool Config
no domain-name
DHCP Pool Config
disable
ip dhcp bootp automatic
Global Config
no ip dhcp bootp automatic
Global Config
enabled
ip dhcp conflict logging
202-10102-01, May 2005
Switching Commands