Port-Security Mac-Address; No Port-Security Mac-Address; Port-Security Mac-Address Move; Snmp-Server Enable Traps Violation - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4

port-security mac-address

This command adds a MAC address to the list of statically locked MAC addresses. The <vid> is
the VLAN ID.
Format
Mode

no port-security mac-address

This command removes a MAC address from the list of statically locked MAC addresses.
Format
Mode

port-security mac-address move

This command converts dynamically locked MAC addresses to statically locked addresses.
Format
Mode

snmp-server enable traps violation

This command enables the sending of new violation traps designating when a packet with a
disallowed MAC address is received on a locked port.
Default
Format
Mode

no snmp-server enable traps violation

This command disables the sending of new violation traps.
Format
Mode
Security Commands
port-security mac-address <vid> <mac-address>
Interface Config
no port-security mac-address <vid> <mac-address>
Interface Config
port-security mac-address move
Interface Config
Disabled
snmp-server enable traps violation
Interface Config
no snmp-server enable traps violation
Interface Config
202-10102-01, May 2005
9-3