Show Vlan - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4

show vlan

This command displays detailed information, including interface information, for a specific
VLAN. The ID is a valid VLAN identification number
Format
Modes
VLAN ID
VLAN Name
VLAN Type
Slot/Port
Current
Configured
Tagging
8-58
show vlan <vlanid>
Privileged EXEC
User EXEC
There is a VLAN Identifier (VID) associated with each VLAN. The
range of the VLAN ID is 1 to 4094.
A string associated with this VLAN as a convenience. It can be up to 32
alphanumeric characters long, including blanks. The default is blank.
VLAN ID 1 always has a name of `Default`. This field is optional.
Type of VLAN, which can be Default, (VLAN ID = 1), a static (one that
is configured and permanently defined), or Dynamic (one that is created
by GVRP registration).
Valid slot and port number separated by forward slashes. It is possible to
set the parameters for all ports by using the selectors on the top line.
Determines the degree of participation of this port in this VLAN. The
permissible values are:
Include - This port is always a member of this VLAN. This is equiva-
lent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is equivalent
to registration forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically registered in
this VLAN via GVRP. The port will not participate in this VLAN unless
a join request is received on this port. This is equivalent to registration
normal in the IEEE 802.1Q standard.
Determines the configured degree of participation of this port in this
VLAN. The permissible values are:
Include - This port is always a member of this VLAN. This is equiva-
lent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is equivalent
to registration forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically registered in
this VLAN via GVRP. The port will not participate in this VLAN unless
a join request is received on this port. This is equivalent to registration
normal in the IEEE 802.1Q standard.
Select the tagging behavior for this port in this VLAN.
202-10102-01, May 2005
Switching Commands