Vlan Makestatic; Vlan Name; No Vlan Name; Vlan Participation - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4

vlan makestatic

This command changes a dynamically created VLAN (one that is created by GVRP registration) to
a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN
identification number. VLAN range is 2-4094.
Format
Mode

vlan name

This command changes the name of a VLAN. The name is an alphanumeric string of up to 32
characters, and the ID is a valid VLAN identification number. ID range is 1-4094.
Default
Format
Mode

no vlan name

This command sets the name of a VLAN to a blank string. The VLAN ID is a valid VLAN
identification number. ID range is 1-4094.
Format
Mode

vlan participation

This command configures the degree of participation for a specific interface in a VLAN. The ID is
a valid VLAN identification number, and the interface is a valid interface number
Format
Mode
Participation options are:
include
Switching Commands
vlan makestatic <2-4094>
VLAN database
The name for VLAN ID 1 is always Default. The name for other
VLANs is defaulted to a blank string.
vlan name <2-4094> <name>
VLAN database
no vlan name <2-4094>
VLAN database
vlan participation <exclude | include | auto> <1-4094>
Interface Config
The interface is always a member of this VLAN. This is equivalent to
registration fixed.
202-10102-01, May 2005
.
8-51