Canon imageRUNNER ADVANCE C5255 Series Service Manual page 139

2
Technology > Pickup Feed System > Various Controls > Cassette Pickup Assembly
Width detection
Width Length 1 2
B5 257 182 0 ON
EXEC 267 184 0 ON
16K 270 195 0 ON
A5-R 148.5 210 ON 0
A4 297 210 0 ON
STMT-R 139.7 215.9 ON 0
LTR 279.4 215.9 0 ON
B5-R 182 257 ON 0
LTR-R 215.9 279.4 0 0
A4-R 210 297 0 0
LGL 215.9 355.6 0 0
B4 257 364 0 ON
8K 270 390 0 ON
A3 297 420 0 ON
LDR 279.4 431.8 0 ON
12x18 304.8 457.2 0 ON
Also, the cassette presence is detected when the size switch is pushed. (If no switch is
pushed, it is determined as no cassette.)
Separation paper list
It is recommended to separate the following paper depending on the paper status (especially
moisture absorption) and paper trimming state when setting the paper.
This ""separation"" can avoid troubles.
Paper type
Carbonless paper
Transparency
Labels
Tub paper
Pre-punched paper
OK Prince Joshitsu
Canon Europe Canon Recycled 80
(Vision Classic White)
Canon Europe Canon High Grade
(Mondi Business Paper)
Canon Digital Office Colour
(Stora Enso MultiCopy Special Colour Laser)
2 Technology > Pickup Feed System > Various Controls > Cassette Pickup Assembly
Length detection
3 4 1 2 3
ON 0 0 0 0
ON 0 0 0 0
ON 0 ON 0 0
ON 0 ON ON 0
0 0 ON ON 0
ON 0 ON ON 0
ON 0 ON ON 0
ON 0 0 ON ON ON
ON 0 ON 0 0 ON
ON 0 0 ON ON
ON 0 ON ON 0 ON
ON 0 ON ON ON
ON 0 ON ON ON ON
0 0 0 0 ON ON
ON 0 0 0 ON ON
0 0 0 0 0 ON
Basis weight/name etc Main area
Overall -
Overall -
Overall -
Overall -
Overall -
Especially thin paper, 52 gsm JPN
etc.
EUR
Overall
Especially heavy paper 220/250 EUR
gsm etc.
Especially heavy paper 160 gsm EUR
etc.
Multi-purpose tray pickup 1 sheet feed list
Be sure to set the following paper sheet-by-sheet to the Multi-purpose Tray.
4
If fails to set the paper sheet-by-sheet, it may cause troubles.
0
0
0
Glossy paper (coated paper)
0
Tracing paper
0
Washi
0
Extra long paper (up to 1200mm) Pickup can be enabled at service setting.
0
HAMMERMILL
Mohawk
0
Paper that requires extra caution at setting
0
Paper type Basis weight/name
Envelope Overall
Washi Overall
T-2-58
● .Method of Setting 8K and 16K (Chinese Paper)
1) Set the original detection size to AB configuration.r
(Lv.1) COPIER > OPTION > FNC-SW > MODEL-SZ = 0
2) Enable detection and display of Chinese paper (K size paper: 8K and 16K).
(Lv.2) COPIER > OPTION > FNC-SW > KSIZE-SW = 1
3) Change the setting of Cassette 1 from EXEC to 16K.
(Lv.2) COPIER > OPTION > CST > CST-K-SW = 1
4) (Lv.2) COPIER > OPTION > FNC-SW >MODELSZ2 = 0.
5) Turn OFF and then ON the main power.
T-2-59
Paper type
Caution
Let out the air of envelope and disperse the glued tabs
Since there are size variations, non-image area appears in
case of full copy. Handle this by free size setting.
2-101
Basis weight/name
Overall
Overall
Overall
Overall
216 g/m 3
3
216 g/m
T-2-60
T-2-61
2-101