Canon imageRUNNER ADVANCE C5255 Series Service Manual page 274

2
Technology > Updater > System Management Operations > Displaying Logs
5. Select a log level from [Log Level] dropdown list.
• [Log Level]:
Select one of 5 levels ranging from [0] to [4].
See the table below for logs output in each level.
Log Level
Trace Information Important Message
0 - -
1 - -
2 - -
3 - Yes
4 Yes Yes
NOTE:
This list shows the contents of the Log Output.
Log Output
Trace Detailed logs for debug
Information Logs related to operations done on the system
Important Message Update logs output by firmware type
Installation logs by MEAP application
Logs related to enabled functions by system option
Ordinary Error Logs for ordinary errors
System Error Logs for internal system errors
6. Press [OK] button to set the selected log level. Now the log level is successfully set.
2 Technology > Updater > System Management Operations > Displaying Logs
Log Output
Ordinary Error System Error
- - Yes
- Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Description
■ Displaying Logs
● Update Logs
This section describes how to confirm System Option/MEAP Application Installation Logs and
Firmware Update Logs.
1. Start [Service Mode] at Level 1.
2. Press [Updater] button.
F-2-434
3. Press [Software Management Settings] button.
T-2-111
2-236
F-2-435
2-236